|
|
|
|
LOW-TEMPERATURE HANDHELD DIFFERENTIAL INFRARED THERMOMETER
|
| Scale Range: | -40°C to 100°C or -40°F to 212°F |
| Resolution: | 0.1°C or 0.1°F |
| Accuracy: | ±0.5°C or 1.0°F |
| Repeatability: | ±0.1°C or ±0.2°F |
| Temperature: | All Functions in °C or °F |
| Noise Effective Temperature: | <0.1°C or °F |
| Temperature Measurement Modes: | Surface Temperature, Ambient Dry Bulb Air Temperature and the Differential Between The Two |
OPTICAL CONSIDERATIONS
| Optical Configuration: | Robust, Aerospace-Quality, Double-Coated Zinc Selenide Optics per Military Specification MIL-C-13508 |
| Spectral Pass Band: | 8 < Wavelengths < 14 Microns |
| Sighting: | Patented TTL/SLR Intra-Optical Light Sighting: Visible Light Illuminates the EXACT Target AREA being Measured |
| Illumination Source: | Light Emitting Diode- SAFE- NO LASERS! |
| Focus: | Variable from 4° down to 5 mm Spot Size with Vario-Zooom (Patent Pending) |
| Display: | Numeric Liquid Crystal Display on Rear Panel |
OPERATING CONDITIONS
| Operating Environment: | -20°C to 70°C or +14°F to 160°F, up to 99% Relative Humidity, Non-Condensing |
| Storage Temperature: | Same as Operating Environment Temperature |
ELECTRICAL INTERFACE
| Power Requirements: | Rechargeable Nickel
Cadmium Batteries 40 Hours Continuous Use on Full Battery Charge |
| Output Signal: | -40 mV to 100 mV at 10 mV/°C |
| Battery Charger: | 100-240 Volt, 50-60 Hz. U.L. Listed Standard |
GENERAL
| Response Time: | <1 Second |
| Emissivity Compensation: | Settable from 10% to 99% on Rear Panel |
| Operating Distance: | 2 cm to Infinity |
| Warranty: | One Year Limited Warranty on Parts & Labor |
Everest Interscience, Inc. has a policy of continued design upgrade. Therefore, we reserve the right to change specifications without notice.
|
Everest Interscience
Copyright © 2008 Last modified: 04/24/08 |
